[SIGHT] HOW TO INSTALL SIGHT
Recent uploads
•
4m 45s
The sight is attached to the upper part of the riser as follows:
First, fix the mounting block to the riser to install the sight.
Then, connect the carbon extension to the mounting block.
Align the small groove on the carbon extension with the center hole of the mounting block and tighten the bolt to secure it.
Finally, connect the side pin to the head attached to the vertical sight bar, which moves up and down. Once secured, the sight installation is complete.
Up Next in Recent uploads
-
[CUSHION] CUSHION PLUNGER DESCRIPTION...
The cushion plunger is a spring-loaded device that absorbs the impact when the arrow contacts the rest and helps keep the arrow from deviating from the center.
It is mounted on the side of the bow handle, directly behind the arrow rest, and is an essential component for improving shooting accurac... -
[LIMB] LIMB & RISER CENTER ADJUSTMENT
Limb setting is the process of adjusting the bow so that the string, limbs, and riser are precisely aligned.
If the limbs are twisted to the left or right, or if they are off the string’s centerline, the arrow may kick to one side and grouping can become inconsistent.
When properly set, the strin... -
4. Hooking
![[CUSHION] CUSHION PLUNGER DESCRIPTION...](https://vhx.imgix.net/wwwaricjp/assets/42cb012c-4aa8-429d-abd7-d973d083b050?auto=format%2Ccompress&fit=crop&h=360&w=640)
![[LIMB] LIMB & RISER CENTER ADJUSTMENT](https://vhx.imgix.net/wwwaricjp/assets/2524bffd-f593-47d1-b21b-a6e9c0739337?auto=format%2Ccompress&fit=crop&h=360&w=640)
