[SIGHT] HOW TO USE SIGHT
Sight
•
3m 7s
By adjusting the elevation pin up and down, you set the aiming point for each distance such as 10m, 20m, 30m, 50m, and 70m.
Left–right adjustments are made when wind or bow settings cause the arrow to drift sideways, allowing you to fine-tune the pin position.
Up Next in Sight
-
[SIGHT] HOW TO INSTALL SIGHT
The sight is attached to the upper part of the riser as follows:
First, fix the mounting block to the riser to install the sight.
Then, connect the carbon extension to the mounting block.
Align the small groove on the carbon extension with the center hole of the mounting block and tighten the bol... -
[SIGHT] ALIGNMENT OF THE AIMER CENTER
Aligning the sight center is extremely important.
If the sight bar that moves up and down is not positioned on a vertical line,
left–right deviations will occur when adjusting it vertically.
Therefore, once the sight is installed, ensuring the vertical center alignment of the sight bar is essenti... -
[SIGHT] SIGHT COMPONENTS
It is a device attached to a recurve bow that helps you visually aim in the direction the arrow will travel.
It is one of the essential basic pieces of equipment for accurate shooting.
Mounted on the bow, it allows vertical and horizontal adjustments according to shooting distance and is indispen...
![[SIGHT] HOW TO INSTALL SIGHT](https://vhx.imgix.net/wwwaricjp/assets/dd233bed-a68a-4088-a8fb-df34fa1ae22a?auto=format%2Ccompress&fit=crop&h=360&w=640)
![[SIGHT] ALIGNMENT OF THE AIMER CENTER](https://vhx.imgix.net/wwwaricjp/assets/1be72fef-3c5a-49f3-8c5a-5a28cb097dbc?auto=format%2Ccompress&fit=crop&h=360&w=640)
![[SIGHT] SIGHT COMPONENTS](https://vhx.imgix.net/wwwaricjp/assets/3a70ba59-a244-4a85-90d4-a723b17c2b36?auto=format%2Ccompress&fit=crop&h=360&w=640)