[SIGHT] HOW TO INSTALL SIGHT
Video Contents Random
•
4m 45s
The sight is attached to the upper part of the riser as follows:
First, fix the mounting block to the riser to install the sight.
Then, connect the carbon extension to the mounting block.
Align the small groove on the carbon extension with the center hole of the mounting block and tighten the bolt to secure it.
Finally, connect the side pin to the head attached to the vertical sight bar, which moves up and down. Once secured, the sight installation is complete.
Up Next in Video Contents Random
-
[LIMB] LIMB & RISER CENTER ADJUSTMENT
Limb setting is the process of adjusting the bow so that the string, limbs, and riser are precisely aligned.
If the limbs are twisted to the left or right, or if they are off the string’s centerline, the arrow may kick to one side and grouping can become inconsistent.
When properly set, the strin... -
[REST] STRUCTURES AND ROLES
The arrow rest is a small support component that holds the arrow securely on the bow.
It is attached to the riser (the main body of the bow) and helps keep the arrow in a stable, consistent position until it is released.
It acts like a “supporting hand,” ensuring the arrow stays steady and proper...
![[LIMB] LIMB & RISER CENTER ADJUSTMENT](https://vhx.imgix.net/wwwaricjp/assets/2524bffd-f593-47d1-b21b-a6e9c0739337?auto=format%2Ccompress&fit=crop&h=360&w=640)
![[REST] STRUCTURES AND ROLES](https://vhx.imgix.net/wwwaricjp/assets/aa33807e-2190-44aa-8fa9-322a05c4cb0c?auto=format%2Ccompress&fit=crop&h=360&w=640)
